Welcome to Zhejiang QD Industrial Co., Ltd
Home | News |
中文版
ABOUT US
Company Profile
Coeporate Culture
Development History
Company Video
PRODUCTS &SERVICES
Inventory
Download
CONTACT US
CN
English
E-MAIL: info@qiangdafastener.com
Trade fair
Trade News
Company News
How to install flange nuts
After understanding the difference between flange nuts and ordinary nuts, let's take a look at how to install flange nuts. When selecting nuts for flange connections, factors such as pipeline operating pressure, operating temperature, medium type, and gasket type should be considered simultaneously. First, locate the small hole where the nut can be installed, then align it with the hole position and insert it. Then slowly rotate it clockwise until it is tightened. Of course, after tightening, you can check if the position is fixed properly. If not, you can make further adjustments
22
2023
/
11
What is the difference between flange nuts and regular nuts
A flange nut is a type of nut with a wide flange at one end, which can serve as an integral washer.This is used to distribute the pressure of the nut on the fixed component, thereby reducing the possibility of component damage and making it less likely to loosen due to uneven tightening surfaces. These nuts are mostly hexagonal in shape and made of hardened steel, usually coated with zinc on the surface.
How to install self-locking nuts
1. Firstly, remove the sludge on the surface of the broken self-locking nut and use the center to unify the center of the section. Then, use an electric drill to install a drill bit with a diameter of 6-8 chamber meters to drill holes at the center of the section. After drilling through the hole, remove the small drill bit and replace it with a drill bit with a diameter of 16 millimeters. Continue to expand and drill through the broken bolt hole.